Industry

July 2022 - Present

Work director at the dte - instalações especiais.

January 2022 - June

Project engineer at the dte - instalações especiais.

October 2017 - June 2019

Electrotechnical Engineer at the ITEC - Iberiana Technical.

Research

July 2019 - December 2021

PhD researcher at Centro ALGORITMI, of the University of Minho. I work on the project DAIPESEV - Development of Advanced Integrated Power Electronic Systems for Electric Vehicles, founded by the FCT (Fundação para a Ciência e a Tecnologia) with the reference POCI-01-0145-FEDER-030382/2017.

May 2013 - April 2017

PhD Studentships founded by the Fundação para a Ciência e a Tecnologia (FCT) with the reference SFRH/BD/86628/2012. The thesis was subordinated to the theme "New Topology of Bidirectional Unified Converter for Traction and Battery Charging Systems in Electric Vehicles". In the PhD thesis was implemented a new topology of bidirectional converter that integrates the powertrain and the battery charging system.

September 2010 - March 2013

Researcher at the laboratory of the Group of Power Electronics and Energy (GEPE) at the Industrial Electronics Department of the University of Minho, in the research project MOBI-MPP (Assessment and Development of Integrated Systems for Electric Vehicles) with the reference MIT-Pt/EDAM-SMS/0030/2008 founded by the FCT.

Invited Professor

February 2024 - Present

Invited Professor at the Department of Technology of the Polytechnic Institute of Cávado and Ave, teaching the curricular unit of Automation and Industrial Robotics for the degree in Industrial Engineering and Management and Advanced Automation for the Master in Electronics and Computer Engineering.

February 2023 - August 2023

Invited Professor at the Department of Technology of the Polytechnic Institute of Cávado and Ave, teaching the curricular unit of Automation and Industrial Robotics for the degree in Industrial Engineering and Management and Advanced Automation for the Master in Electronics and Computer Engineering.

April 2022 - August 2022

Invited Professor at the Department of Technology of the Polytechnic Institute of Cávado and Ave, teaching the curricular unit of Automation and Industrial Robotics for the degree in Industrial Engineering and Management.

February 2019 - September 2019

Invited Professor at the Department of Technology of the Polytechnic Institute of Cávado and Ave, teaching the curricular unit of Power Electronics for the degree in Electrotechnical and Computer Engineering.

October 2018 - January 2019

Invited Professor at the Department of Technology of the Polytechnic Institute of Cávado and Ave, teaching the curricular unit of Advanced Automation for the Master in Electronics and Computer Engineering.

March 2017 - August 2017

Invited Professor at the Department of Technology of the Polytechnic Institute of Cávado and Ave, teaching the curricular unit of Power Electronics for the degree in Electrotechnical and Computer Engineering.

September 2016 - February 2017

Invited Professor at the Department of Industrial Electronics of the University of Minho, teaching the curricular units of Electronics for the degree in Physical Engineering and Electrotechnics for the degree in Textile Engineering.

Robotics Trainer

November 2018 - June 2019

Trainer of the "Robotics Workshop" that took place at basic school Lamaçães. There was an initiation class, where the students learn to use the soldering iron and they started programming the robot Bot'n Roll ONE A online through the platform Open Roberta Lab. Open Roberta Lab is an open source programming platform developed by Fraunhofer Institute under the initiative Roberta - Learning with Robots.
The second class improve the knowledge obtained during the initiation class (previous year). The students continuing with the programming of the robot Bot'n Roll ONE A in open source software Arduino.

November 2017 - June 2018

Trainer of the "Robotics Workshop" that took place at basic school Lamaçães. The workshop aimed to take the students curiosity, directing them to the discovery, apprehension and application of the concepts in the areas of Physics, Mathematics and Informatics. In this workshop, the students welded and built the robots Bot'n Roll ONE A. It was a practical and oriented approach, which allowed to consolidate the scientific knowledge acquired in class. The robots were used as work tools.


Top